Comments:

Based on price you cant beat them. The fit is awesome. I had no issues at all with front. The rear required a little tweaking to get them to sit perfect.I used my youngest daughter for a second pair of hands. Assembled in house and then installed in driveway. 45 minutes to unpack and install the SS dressing and trim rubber.20 minutes to install front. 1 hr for rear. Never needed to pull tires off of truck.I did use some of my own hardware in rear as I couldn't get the look perfect and still use the factory finder holes on the Left side. My guess is a previous owned hit something with the bed and the body work was the issue. That why you trail fit first.My opinion is they look every bit as good as my buddies high dollar set. $$ for the money they are very much a better deal. I have installed the high dollar ones as well and ALL of them have to be tweaked a little.

Comments:

I'm pretty much an unskilled installer, but I was able to actually make this product look really great on my 2011 Silverado! It took me a half day to get rid of the original mud flaps due to salt corrosion but my mechanic lent me grinder, which zipped 'em right off with barely a scratch to the paint. It then took me another 8 - 9 hours to install, mostly due to my own lack of experience. Some hints from my own errors and misunderstandings: 1. The 'clips': there are 2 styles, one is actually a spring clamp which tightens with a screw; 4 go in the sides of each flare. Then the 2 that do actually just clip on go at the top of each flare to act as a nut for screws you put up through the flare into existing (factory) holes. I mounted the flares without help and had a very difficult time keeping the flare held up while inserting the screw up through it and into the 'clip' while keeping it centered on the factory hole (it's a blind operation, you can't see the hole). I was eventually able to do it by sticking a nail down through the hole to act as a guide that I could push out with the screw, although it was still difficult because you need to use some force for the alignment. 2. The 1' seal: maybe because of my stupidity I never realized it goes over the outside lip of the flare to seal it against the truck's fender. It's also really about 1/4' (U-shaped, 1/4' wide front and back) and they provide a tool to help separate the front and back to fit it over the fender lip. I didn't realize how the tool is used, I guess because it's the last thing depicted on the instructions, so I used my fingers to separate the front and back of the seal to fit the fender lip between them; a slow and, eventually, painful, way to do it. Also, I decided to NOT wrap the seal around the end corners of the flares since I was concerned that it may not hold on tight corners and that they may have only provided a minimal length of seal strip. As it turned out, they DO provide an adequate length to completely cover the outside edges of the flares, I had about 2' left, but it looks just fine ending the seal where the flare lip goes out of sight. 3. The hardware: I took the advice of some other reviewers and replaced the bolts and washers (not lock nuts, they're not visible and pretty protected) with stainless steel hardware, which added about $50 to the cost. 4. Removing wheels: I had to remove the rear wheels to remove the old mud flaps and, if I were doing it again, I'd probably keep them off and mount the flares immediately. The spring clamps mentioned in paragraph 1, above, require some pressure to start the small bolt in the clamps' hole, not a problem with the front fenders but pretty hard at the lowest parts of the rear. I used an offset screw driver and got it done but with a mental note to monitor them for a while.

Comments:

super addition to my 2011 SLIVERADO:))

Comments:

Love it!!

Comments:

Very easy install, and look Great

Comments:

These are a really good alternative to spending a fortune on bushwackers, fit is realty good, super simple install.

Comments:

Look nice on my 2007.5 chevy ext cab reg box

Comments:

I love the fender flares. Great quality and price. I had to have mine paint matched. Pricy but worth it

Comments:

Drivers side front flare was twisted just a bit but honestly that may have helped it have a tighter fit against the fender, pass front had a teeny tiny scuff smaller than a dime so I don't even care, can't see it unless you look extremely close so no one but me will ever notice. Not bad, I'd compare them to sets that cost twice as much. They are larger than the description though, would prefer them not to stick out so far but still a much needed improvement on my old truck.

Comments:

I love the look of these flares on my truck, but they were a little frustrating and time consuming to install.

Comments:

Good product for the price. Installation with provided hardware was simple and fit fine in 1 to 2 hours. Fenders scuff easy though so if you don't want any marks need to be careful while installing edge trim and torx bolts (i.e., fake rivets). I scuffed one sliding on cardboard installing trim. Hell yeah!

Comments:

Bought these for my! son for his truck and they were easy to but on. Good quality for the price and they arrived on time.

Comments:

Perfect fit and easy install...

Comments:

Hubby absolutely loved these, great price and the truck looks so much better with these!!! It was a little challenging putting the black rubber around edges and takes some time but over all once done, it pays off. They look Awesome. Thanks for a great product and at a reasonable price.

Comments:

They look very good, easy to instal.

Comments:

Could include better instructions.

Comments:

love them

Comments:

They look great. Installation was a bit tricky, I managed it.

Comments:

Nice product fits well.

Comments:

They look great on my truck and were very easy to install.

Comments:

Fast shipping , easy install, looks great

Comments:

Wish I could leave more stars. I've never had anything go on as perfect as these. Perfect fit like it came from the factory!!! Covers up the z71 sticker a little bit though.

Comments:

Great

Comments:

Very good quality made

Comments:

Was very happy with the product

Comments:

Amazing fender flares, bolted right up and work perfect with the truck. Now I can run my stance and not have the state troopers on me about it.

Comments:

What I expected for the price.

Comments:

This item is awesome. Easy to install, looks great, and very durable. I would highly recommend this product.

Comments:

Great fit. 2007 Silverado 2500 HD with 6.5' bed. Easy to install. If you have rusted wheel wells in the rear you may have an issue as the top 2 screws for the rear are really what hold these in place. I actually had to weld in a new inner lip to have something to screw to. Also they will cover your '4x4' decal somewhat. I ordered new decals and installed them in a different spot once the flares were installed. As stated good fit. Good price. Looks great.

Comments:

Fit perfect and went o.n truck easy. Had them painted and they look great.

Comments:

worked well

Comments:

The fender flares look good, and the shape seems to be controlled well. I think installation will be fairly simple- I recommend the company to offer a gloss black version sonetime in the future.

Comments:

This was very easy to install and came with everything you need and it looks great on my Chevy

Comments:

Easy on .. came with a few back up rivets and has been durable. Good buy!

Comments:

I bought them for my 2013 Chevy Silverado and they were a perfect fit!

Comments:

A little difficult to assemble but looks great.

Comments:

These fit my Sileverado 1500 like a glove! The rear fenders may require a second set of hands but pretty easy to install.

Comments:

Easy to install, fast shipping

Comments:

The fit is awesome. I had no issues at all with front. The rear required a little tweaking to get them to sit perfect. I used my youngest daughter for a second pair of hands. Assembled the, in house and then installed in driveway. 45 minutes to unpack and install the SS dressing and trim rubber. 20 minutes to install front. 1 hr for rear. Never needed to pull tires off of truck. I did use some of my own hardware in rear as I couldn't get the look perfect and still use the factory finder holes on the Left side. My guess is a previous owned hit something with the bed and the body work was the issue. That why you trail fit first. My opinion is they look every bit as good as my buddies high dollar set. $$ for the money they are very much a better deal. I have installed the high dollar ones as well and ALL of them have to be tweaked a little.

Comments:

Hubby absolutely loved these, great price and the truck looks so much better with these!!! It was a little challenging putting the black rubber around edges and takes some time but over all once done, it pays off. Thanks for a great product and at a reasonable price.

Comments:

This item is awesome. Easy to install, looks great, and very durable. I would highly recommend this product.

Comments:

Look great on truck

Comments:

Wish I could leave more stars. I've never had anything go on as perfect as these. Perfect fit like it came from the factory!!! Covers up the z71 sticker a little bit though.

Comments:

I bought them for my 2013 Chevy Silverado and they were a perfect fit!

Comments:

Great quality but sent it back. It does not fit 2014-15

Comments:

Good

Comments:

Super easy to install and looks awesome. Holds tight to the body, too. Put these on my son's truck after cutting and treating the rust in the fenders. Looks like a totally different vehicle. I worry about rust on the screw heads, but they are supposed to be Marine grade so we will see. You will need 2 people to attach it to the fenders just to line up the factory holes, and the lower clips were not as clear as they should be in the directions. The company has a YouTube tutorial as well a amateurs demonstrating how they work. Thank you YouTube for showing how they work.

Comments:

Excellent fit no drilling at all very happy with the product and reasonable on price

Comments:

Great quality. Perfect fit!!!

Comments:

Looks great on my 2007 Silverado 2500 and was easy to install except for the rear wheels were a little more difficult. I get a lot of positive comments. If you put them on a Silverado 2500 you will need to remove the graphics which is no big deal.

Comments:

good product , fit good , easy install my truck looks very good tony m.

Comments:

Just installed them on my 2009 Silverado went together good install was easy all holes lined up perfectly so far they seem like a very good product.

Comments:

So let's get the negatives out of the way. The box was not in good shape when it got to me. It had already been ripped open but everything was still inside.Other than those two small problems this is a great product. Very easy installation, after the initial putting them together it only tool about 30mins to put them on my truck. Very snug fit. I don't see why you wouldn't by these over them brands of equal quality that cost almost three times as much. I have already referred to family member and a family friend to this company

Comments:

Great product, easy to install, and great service from vendor. Recommend.

Comments:

They fit like a glove and look simply awesome period!!!

Comments:

GREAT